Description
CHARACTERISTICS OF MICROTADELAKT
2 h product life time
High Stucco Effect
Compressive strength
Water + Powder
PRODUCTS
The choice of product is fundamental as it will directly influence the texture of the final finish. We will choose the Fine texture if we are looking for a smoother result to the touch or we will opt for the Medium or Base texture if we want a rougher finish and with greater anti-slip power.
FINO
Microcement of ultra fine granulometry. Application recommended for vertical surfaces. Stucco effect.
Classified according to UNE-EN 13813 as CT-C30-F9.
FINISH:Traditional
PREPARATION: 10 kg Microtadelakt Fino + 4 L of Water
CONSUMPTION: 0,5kg/m2
FORMAT: 10kg
40 colors to choose from
Use only as a finish
REGULAR
Microcement of fine granulometry. Application on horizontal and vertical surfaces. Light stucco effect.
Classified according to UNE-EN 13813 as CT-C40-F10.
FINISH:Ballast
PREPARATION: 10kg Microtadelakt Regular + 4 L of Water
CONSUMPTION: 0,6kg/m2
FORMAT: 10kg
40 colors to choose from
Use only as a finish
MEDIUM
Microcement of medium granulometry. Application on horizontal and vertical surfaces. Recommended for pavements with medium traffic. Uncoated.
Classified according to UNE-EN 13813 as CT-C40-F10.
FINISHING: Petra
PREPARATION: 20kg Microtadelakt Medium + 6.5L of Water
CONSUMPTION: 0,6kg/m2
FORMAT: 20kg
40 colors to choose from
Use only as a finish
BASE
Coarse-grained microcement. Non-slip. It can be applied on horizontal and vertical surfaces. Recommended for pavements with high traffic. Uncoated.
Classified according to UNE-EN 13813 as CT-C40-F10.
FINISHES: Granza
PREPARATION: 20kg Microtadelakt Base + 5L of water
CONSUMPTION: 1kg/m2
FORMAT: 20kg
40 colors to choose from
Can be used as finish and base
