MICROCEMENT

In addition to being a CE certified product, cemher Microcement has been subjected to multiple tests.

Yes, strict tests show that, after the application and drying phases, Microcement does not release substances into the air that are harmful to adults and children.

Tests show the high resistance of Microcement to various stresses. The surface resistance is higher than that of wood. It is advisable to observe some tips on surface maintenance. See the frequently asked questions: “How to maintain a perfect appearance over time”.

Microcement has specifications similar to those of a high-end wood flooring. This material has excellent strength and is suitable for use as a coating of floors and walls, however the traditional microcement is not comparable to ceramics, but our microcement microrock is the only one that is comparable to ceramic surfaces.

All surfaces, even the toughest, can be scratched. Think of steel (the body of cars) which scratches easily when subjected to stress with sharp objects. As with all surfaces, these scratches will be more evident on very shiny surfaces and soft on more matte surfaces. For this reason, we recommend a dull finish and a more material effect. If scratches need to be removed, extraordinary maintenance can be performed, as with wood surfaces.

Thanks to the special toners, it is possible to obtain many color combinations. The intensity and shade of the color will vary, depending on the amount of dye used. In fact, the color chart only offers a rough guide: it will be the applicator’s task to provide samples based on the customer’s requests. It is also possible to create effects such as polished, silky, cloudy and acid dyes, as well as to provide shades and decorative inserts to form unique and customized finishes with great aesthetic impact and elegance.
Take a look at the color page.

As a guide, it would take about a week to create 100 m2. But application times depend on the complexity and type of installation. In the case of an existing surface, it may require a few more days, necessary for the evaluation and preparation of the base.

The colors used have maximum resistance to UV rays and the protective treatments do not yellow. As with all types of materials, after constant exposure to sunlight and moonlight, the colors may fade slightly, which cannot be considered a defect.

Yes, heavy and sharp objects can mark microcement surfaces.

Cemher offers a wide range of sealers and types of microcements. The choice of the appropriate protection and type of microcement depends on the requirements of the end customer. There are solvent and water-based products. Depending on the chosen sealer will fully protect from liquid substances, especially the most used in the domestic environment, such as wine, oils, vinegar and coffee, must be removed quickly from the surface of microcement before they can penetrate to any depth, if used in combination of waterproof microcements mass and the most resistant sealer will get a surface completely impervious to stains, water etc.

Certain effective precautions are recommended: a) provide a doormat at the entrance of the house that can retain dust, sand and abrasive particles b) sweep or vacuum regularly c) use protective felt under furniture, especially under furniture that is moved often, such as chairs d) in case it is necessary to move heavy furniture, e) before painting, electrical, plumbing, moving and handling furniture, protect the floor with cardboard, wool blankets and nylon sheeting.

Cemher brand does not manufacture paints, but cement and polymer coatings for use as a decorative finish (thickness 2-4 mm) for interior and exterior surfaces. Considered as an example of a coating with great architectural and aesthetic value, microcement was formulated to coat, restore and recreate vertical and horizontal surfaces, while offering the much sought-after effect of “cement finish” floors.

Yes, simply sand/scrape the surface and reapply Microcement. This procedure is especially useful for the restoration and renovation of surfaces such as, for example, change of use of commercial premises.

Microcement has a perfect adhesion even on surfaces with underfloor heating systems. It is essential to choose a suitable substrate for the installed heating system. Cemher microcement has a heat conductivity value of λ = 0.46.

Yes, it can be used on any type of surface provided it is treated properly. However, it is not recommended to expose the product to continuous contact with a heat source, or place hot pots, the special microcement microrock if that can withstand high temperatures and waterproof, but it is always advisable not to overexpose long periods at high temperatures as a precaution, although the product withstands more than 200 º temperature.

Heat resistance tests performed on the material obtained excellent results. Microcement was heated to a temperature of 200°C without showing any defects. However, it is not advisable to place boiling objects directly on the surface, so suitable heat-resistant mats should be used. In addition, in the case of kitchen countertops, it is recommended to use a suitable cutting board, microrock withstands high temperatures and hardnesses similar to ceramics, but a sharp knife could damage the surface as with marble, ceramics, etc.

Absolutely yes. Microcement has a high resistance to abrasion and is also recommended for the construction of access ramps, parking lots and driveways. In these cases, only the base coat version of Microcement is applied, which also ensures that the material has slip resistance. Also, remember that resistance to vehicular traffic is determined by the thickness of the substrate. When restoring old floors, it will be convenient to verify the conditions and find out the thickness of the support, the best microcement for these surfaces is the microrock.