Skip to main content

MICROCEMENT APPLICATION

A different microcement, according to the needs

Thanks to our experience as microcement manufacturers and our work with architects, interior designers, microcement applicators and masons, we recognise the needs of the work. This has allowed us to create specific products and technical solutions to provide the best solution for each room or architectural problem.

microcement-sistemas_cemher-top-001

MINERAL

The MINERAL solution is the ideal solution for those who want their microcement to look as natural as possible. Its hardness allows it to be applied in any part of a home.

Appropriate for any interior space of home.

Within the Mineral Solution, you will find 3 lines of microcement: Microduo, Microdur and Microlevel. Aesthetically, the difference is minimal. The choice between one line or another usually depends on the preferences of the professional applicator.

microcement-sistemas_cemher-06
1
1. MICROCEMENT BASE

Must be applied 2 coats

2
2. MINERAL: FINISH + COLOR

Must be applied 2 coats

3
3. PORE-SEALING

Must be applied 2 coats

4
4. SEALER

Must be applied 2 coats

4. SEALER

Must be applied 2 coats

3. PORE-SEALER

Must be applied in 2 coats

2. MINERAL: FINISH + COLOR

Must be applied in 2 coats

1. MICROCEMENT BASE

Must be applied in 2 coats

PREVIOUS STEP

Surface Preparation

STEP 1

Application of Microcement Base (2 coats)
Recommended bases in the Mineral Solution:

  1. Microdur Base
  2. Microröck Base
  3. Microflex Base

The choice between one or the other will depend on the substrate material on which it is to be applied.

STEP 2

Application of the Mineral Solution: Finish + Colour (2 coats)
This solution has 3 different products to choose from:
Microduo, Microdur and Microlevel.

It is time to choose the product for the final coat:

STEP 3

Primer application (2 coats):

  1. Hidroprimer

It is applied to avoid undesired variations in the colour tonalities.

STEP 4

Sealant Application

Recommended sealers in the Mineral Solution:

  1.  Aquamax Extreme (water-based)
  2.  Maxipur 100% (solvent-based)

The sealer coat is extremely important, as this is a non-waterproof microcement system by mass. The waterproofing of the surface will depend on the grams of sealer applied per m2. Cemher® recommends applying at least 2 coats.

*Important!

When applying, the roller must not be excessively squeezed out. It must be sufficiently impregnated with sealer to achieve proper waterproofing and prevent dampness.

MINERAL +Rock

The MINERAL+ROCK solution is characterised by its unequalled performance, as it is a micro-cement which is harder than polished cement. In addition, it is waterproof in mass, and has an incomparable compressive and tensile strength. Thanks to this, it is not affected by solvents or chemical compounds, it does not crack . It has a high adhesion to any substrate. It is especially designed for use in high traffic areas.

Suitable for commercial and high traffic areas.
Suitable for outdoor use and immersion in water such as swimming pools.

Within the Mineral+Rock Solution, you will find 2 lines of microcement: Microröck and Micropool. Aesthetically they are exactly the same. The difference between the two is that Micropool is specially designed for applications on surfaces immersed in water such as swimming pools.

Microröck: Two-component microcement. It does not crack or break. It does not stain. It has a high adherence to any support. It is especially designed for application in high traffic areas.
Micropool: It is specially designed for applications on surfaces immersed in water such as swimming pools. Specifically formulated to create a certain permeability to water vapour and thus avoid blistering or the appearance of blisters due to lack of permeability.

microcement-micropools_cemher-06
1
1. MICROCEMENT BASE

Must be applied 2 coats

2
2. MINERAL +ROCK: FINISH + COLOR

Must be applied 2 coats

3
3. SEALER

Must be applied in 2 coats

3. SEALER

Must be applied in 2 coats

2. MINERAL: FINISH + COLOR

Must be applied in 2 coats

1. MICROCEMENT BASE

Must be applied 3 coats in swimming pools

PREVIOUS STEP

Surface Preparation

STEP 1

Application of Microcement Base
Recommended bases to choose from in the Mineral + Rock Solution:

  1. Microröck Base (2 coats)
  2. Micropool Base (3 coats)

*Important! Do not use any other base other than Microröck or Micropool, to avoid the appearance of cracks.
Never apply on top of soft mortars or primers.

STEP 2

Application of the Mineral +Rock Solution: Finish + Colour (2 coats)
This solution has 2 different products to choose from:
Microröck and Micropool.

It is time to choose the product for the final coat:

STEP 3

*Important! In swimming pools only Maxipur 100% can be applied.

Sealer application of choice (2 coats)

Sealers recommended in the +Rock Solution:

  1.  Aquamax Extreme (water-based)
  2.  Maxipur 100% (solvent-based)

In this case, as it is waterproof in mass, the sealing layer is only applied to provide chemical protection against: bleach, salfumán, lime or chlorine among others.

MINERAL +Flex

The MINERAL+FLEX solution, thanks to its high flexibility, is ideal for buildings or constructions where there is or may be structural movement and a predisposition to the appearance of fissures or cracks. This is especially the case in metal or wooden structures, due to expansion and contraction. In addition, it is waterproof in mass, a really important attribute depending on the surface where it is to be applied.

Suitable for spaces with possible structural movement.
Suitable for humid areas.

The Mineral+Flex Solution is composed of Microflex microcement. It is the most suitable microcement for application on any area with a predisposition to the appearance of cracks or fissures, whatever their origin.

Microflex: Two-component microcement. It is characterised above all by its great flexibility. It can be rolled up as if it were a fabric. Even when applying several layers of great thickness, we will still have a highly flexible material. It has not yet been equalled by any other coating. In addition, it is waterproof, a very important attribute depending on the surface where it is to be applied.

microcement-floors_cemher-06
1
1. MICROCEMENT BASE

Must be applied 2 coats

2
2. MINERAL +FLEX: FINISH + COLOR

Must be applied 2 coats

3
3. SEALER

Must be applied in 2 coats

3. SEALER

Must be applied in 2 coats

2. MINERAL: FINISH + COLOR

Must be applied in 2 coats

1. MICROCEMENT BASE

Must be applied in 2 coats

PREVIOUS STEP

Surface Preparation

STEP 1

Application of Microcement Base

Base coat available in Mineral + Flex Solution:

  1. Microflex Base (2 coats)

STEP 2

Application of the Mineral +Flex Solution: Finish + Colour (2 coats)
This solution has 1 product available: Microflex.

It is time to choose the product for the final coat:

Ethereal Finish:
1. Microflex Fine + Color

Petra Finish:
1. Microflex Medium + Color

Granza Finish:
1. Microflex Base + Color

STEP 3

Application sealant of choice (2 coats)

Sealers recommended in the +Flex Solution:

  1.  Aquamax Extreme (water-based)
  2.  Maxipur 100% (lvent-based)

In this case, as it is waterproof in mass, the sealing layer is only applied to provide chemical protection against: bleach, salfuman, lime or chlorine among others.

microcement-ayuda-banner_cemher-4

DO YOU HAVE DOUBTS ABOUT MICROCEMENT?

We want to help you with your project.

If you have any questions or need more information, please contact us, we will be happy to advise you and give you a budget.

WE RECOMMEND

microcement-floors-galeria_cemher-04

SPACES THAT INSPIRE

Need inspiration for your next project?

PHOTO GALLERY
microcement-generico_cemher-5

CEMHER PRODUCTS

Discover all Cemher® products.

PRODUCTS
microcement-tienda_cemher

WHERE TO BUY?

Find your nearest Cemher distributor.

DISTRIBUTORS